Solid carbide rod is used for making reamer
HAO Carbide manufacture tungsten carbide rod since 2009, Including solid carbide rods, tungsten carbide rods with single hole, tungsten carbide rods with double hole and no-standard carbide rod, such as carbide rod with 2 spiral coolant hole(30°)and carbide rod with 3 spiral coolant hole(30°&15°). Tungsten carbide rod also called carbide alloy rod, carbide alloy bar, or tungsten carbide round rod and so on. There are different technique when it comes to manufacture. One is molding rod, another is Extrusion.
Today I want to introduce our new updated grade for carbide rod. The grade is best for making reamers.
New Updated JZ12F, Bending strength could reach to 4200N/mm2. Best material for making reamers.
Ultrafine grain size 0.4μm, high cobalt content with excellent hardness and toughness, Applicable for end mill, REAMER. Especially for cutting steel(HRC:45-55), Aluminum alloy and titanium.
Cobalt content:12%, WC content: 88%, Density:14.1, Hardness:92.5HRA,
- Ground solid tungsten carbide rods
- Unground solid tungsten carbide rods
- Tungsten carbide rods with one coolant hole
- Tungsten carbide rods with two coolant holes
- Nonstandard tungsten carbide rods
- Tungsten carbide bars and strips
- Tungsten carbide plates
HAO Carbide Co., LTD.
Office: World trade plaza, Hetang
district, Zhuzhou city,Hunan